SKU: 22640069.
Categories: , .

Flash Harry Drip Stop Fibre 1lt


DRIP STOP FIBRE is a polymer modified anionic bitumen emulsion containing a synthetic fibre; the fibre
enables the product to form a continuous waterproofing layer without the inclusion of a membrane. Once
completely dry the product becomes highly resistant to swelling or re-emulsification, a problem associated
with other water based systems. The product us supplied in 1L, 5L and 25L containers and should be used
within two months of the date indicated on the container. Thorough stirring is required before use and the
container must be protected against frost.





Viscosity: 150 Krebbs at 25ºC.
Colour: Chocolate Brown when wet, Black when dry.
Total Solids: +/- 55%
Specific Gravity: +/- 1.08
Water Vapour permeability +/- 1.5g /m2, /24hr /mm for a 3 mm film
Flash Point: None, water based.
Drying Time: (Between Coats) Minimum 45 minutes at 25ºC at 65% R.H.
(Last Coat) 2-3 hours before resistant to rain.
(Non Ponding Conditions)
Cleaning: Water when wet, Solvent when dry.
Chemical Resistance:
Resistant to mild acid and alkali solutions. Not resistant to
aromatic and aliphatic Hydro-carbon solvents – Diesel or